Operation And Control Of The Machine; Machine Maintenance Control - Konica Minolta bizhub 750 Security Manual

1

Operation and control of the machine

The Administrator of the machine should perform the following operation
control.
- The Administrator of the machine should log off from the Administrator
Setting mode whenever the operation in the Administrator Setting mode
is completed. The Administrator of the machine should also make sure
that each individual user logs off from the User Authentication mode after
the operation in the User Authentication mode is completed, including
operation of the Secure Document file, User Box, and User Box file.

Machine Maintenance Control

The Administrator of the machine should perform the following maintenance
control activities.
- Provide adequate control over the machine to ensure that only the Ser-
vice Engineer is able to perform physical service operations on the ma-
chine.
- Provide adequate control over the machine to ensure that any physical
service operations performed on the machine by the Service Engineer are
overseen by the Administrator of the machine.
1-10
Security
750/600