Accessing The Secure Print; Setting Can Be Made Only From The Control Panel - Konica Minolta bizhub 750 Security Manual

User Operations
3.3.1

Accessing the Secure Print

Note
Do not leave the machine while you are in the user operation mode. If it
is absolutely necessary to leave the machine, be sure first to log off from
the user operation mode.
For the Secure Print ID, enter the one that has been set on the printer
driver side.
If a wrong Secure Print ID is entered, the target Secure Print Document
will not be displayed. Enter the correct Secure Print ID.
For the Secure Print Password, enter the 8-digit one set on the printer
driver side.
The machine rejects any Secure Print Password that consists of less than
8 digits.
<Setting can be made only from the control panel>
0 For the logon procedure, see "Performing user authentication" on
page 3-2.
1
Log on to the user operation mode through User Authentication from
the control panel.
2
Press the [Box] key.
3
Touch [System User Box] tab.
750/600
3
3-15