IBM IntelliStation A Pro 6224 Hardware Maintenance Manual And Troubleshooting Manual page 97

Note: See Chapter 7, "Parts listing, Type 6224," on page 107 to determine which components are replaceable by the
customer (CRU), and which components must be replaced by a field service technician (FRU).
Error code/symptom
289
(DIMM disabled by POST or user)
301
(Keyboard or keyboard controller error)
303
(Keyboard controller error)
602
(Invalid diskette boot record)
604
(Diskette drive error)
662
(Diskette drive configuration error)
962
(Parallel port error)
1162
(Serial serial port 1 or 2 error)
1762
(Hard disk configuration error, IDE only)
1962
(Drive does not contain a valid boot
sector)
5962
(IDE CD-ROM drive configuration error)
8603
(Pointing-device error)
FRU/action
1. Run the Configuration/Setup Utility program, if the DIMM was
disabled by the user.
2. Disabled DIMM, if not disabled by user.
3. System board
1. Keyboard
2. System board
v System board
1. Diskette
2. Diskette drive
3. Cable
4. System board
1. Run the Configuration/Setup Utility program.
2. Diskette drive.
3. Cable.
4. System board.
1. Run the Configuration/Setup Utility program and diagnostics.
2. Diskette drive.
3. Drive cable.
4. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Hard disk drive.
2. Hard disk drive cables.
3. Run the Configuration/Setup Utility program.
4. System board.
1. Verify that a startable operating system is installed.
2. Run diagnostics.
3. Hard disk drive.
4. Cable.
5. System board.
1. Run the Configuration/Setup Utility program.
2. CD-ROM drive.
3. CD-ROM power cable.
4. IDE cable.
5. System board.
6. Battery.
1. Pointing device
2. System board
Chapter 6. Symptom-to-FRU index
87