Scsi Error Codes - IBM IntelliStation A Pro 6224 Hardware Maintenance Manual And Troubleshooting Manual

3. If original ISPR code is still present after disconnecting all SCSI cables and

SCSI error codes

Error code
All SCSI Errors One or more of the
following might be causing the problem:
v A failing SCSI device
(adapter, drive, controller)
v An improper SCSI configuration or SCSI
termination jumper setting
v Duplicate SCSI IDs in the same SCSI
chain
v A missing or improperly installed SCSI
terminator
v A defective SCSI terminator
v An improperly installed cable
v A defective cable
d. Replace SCSI cable attached to channel identified in step 2a on page 102.
e. Replace backplane attached to channel identified in step 2a on page 102.
restarting, perform the following actions until the error is no longer present:
v Reseat the controller
v Replace the controller
FRU/action
1. External SCSI devices must be turned on before you turn on
the computer.
2. Make sure that the cables for all external SCSI devices are
connected correctly.
3. If you have attached an external SCSI device to the computer,
make sure the external SCSI termination is set to automatic.
4. Make sure that the last device in each SCSI chain is terminated
correctly.
5. Make sure that the SCSI devices are configured correctly.
Chapter 6. Symptom-to-FRU index
103