IBM IntelliStation A Pro 6224 Hardware Maintenance Manual And Troubleshooting Manual page 100

Note: See Chapter 7, "Parts listing, Type 6224," on page 107 to determine which components are replaceable by the
customer (CRU), and which components must be replaced by a field service technician (FRU).
Error code/symptom
035-253-s99
(RAID adapter initialization failure)
035-XXX-099
(No adapters were found.)
035-XXX-s99
(Failed RAID test on PCI slot s. s = number
of failing PCI slot.)
035-XXX-snn
(s = number of failing PCI slot, nn = SCSI
ID of failing fixed disk.)
089-XXX-001
(Failed microprocessor test)
089-XXX-002
(Failed optional microprocessor test)
201-XXX-0nn
(Failed memory test.)
Note:
v nn 1=DIMM 1; 2=DIMM 2; 3=DIMM 3;
4=DIMM 4 on system board.
v nn 5=DIMM5; 6=DIMM6; 7=DIMM7;
8=DIMM8 on microprocessor board.
201-XXX-999
(Multiple DIMM failure, see error text)
202-XXX-001
(Failed system cache test)
202-XXX-002
(Failed system cache test)
90
IntelliStation A Pro Type 6224: Hardware Maintenance Manual and Troubleshooting Guide
FRU/action
1. ServeRAID adapter in slot s is not configured properly. Obtain
the basic and extended configuration status and see the ServeRAID
Hardware Maintenance Manual for more information.
2. Cable.
3. Adapter.
v If adapter is installed, re-check connection.
1. RAID adapter
2. Cable
3. System board
v Hard disk drive with SCSI ID nn on RAID adapter in PCI slot s.
1. Verify microprocessor 1 is installed and seated correctly.
2. Verify BIOS code is at latest level.
3. Microprocessor 1.
4. System board.
1. Verify microprocessor 2 is installed and seated correctly.
2. Verify BIOS code is at latest level.
3. Microprocessor 2.
4. Microprocessor board.
1. If nn = 1-4:
a. DIMM nn
b. System board
2. If nn = 5-8:
a. DIMM nn
b. Microprocessor board
v See error text for failing DIMMs.
1. If nn ≤ 4, system board.
2. If nn ≥ 5, microprocessor board.
1. Verify microprocessor 1 is installed and seated correctly.
2. Verify BIOS code is at latest level.
3. Microprocessor 1.
4. System board.
1. Verify microprocessor 2 is installed and seated correctly.
2. Verify BIOS code is at latest level.
3. Microprocessor 2.
4. Microprocessor board.
5. System board.