Brother MFC-J2510 Basic User's Manual page 99

f
Do one of the following:
 If you loaded your document in the
ADF to scan a 2-sided document,
swipe up or down, or press a or b to
display 2-sided Scan.
Press 2-sided Scan. Go to
step g.
 If you want to scan a single-sided
document, go to step h.
g
Do one of the following:
 If your document is flipped on the
long edge, press
2-sided Scan: Long Edge.
Long edge
Portrait Landscape
 If your document is flipped on the
short edge, press
2-sided Scan: Short Edge.
Short edge
Portrait Landscape
Printing photos from a memory card or USB Flash memory drive
h
NOTE
Skip Blank Page is available only
when using the ADF.
Do one of the following:
 To change the scan type, swipe up or
down, or press a or b to display
Scan Type.
Press Scan Type and choose
Colour or Black and White.
 To change the resolution, swipe up
or down, or press a or b to display
Resolution.
Press Resolution and choose
100 dpi, 200 dpi, 300 dpi,
600 dpi or Auto.
 To change the file type, swipe up or
down, or press a or b to display
File Type.
Press File Type and choose PDF,
JPEG or TIFF.
 If you want to change the file name,
swipe up or down, or press a or b to
display File Name. Press
File Name and enter the file name.
You can only change the first
6 characters.
Press OK.
To scan multiple documents on the

scanner glass, swipe up and down,
or press a or b to display
Auto Crop.
Press Auto Crop and choose On
(or Off).
(For details, see Advanced User's
Guide: Auto Crop.)
 To skip blank pages, swipe up or
down, or press a or b to display
Skip Blank Page. Press
Skip Blank Page and then press
On (or Off).
9
89