Fax Redial; Additional Dialling Operations; Outgoing Call History - Brother MFC-J2510 Basic User's Manual

Fax Redial

If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.
Redial only works if you dialled from the
machine.
a
Load your document.
b
Do one of the following:
 When Fax Preview is set to off, press
Fax.
 When Fax Preview is set to on, press
Fax and then Sending Faxes.
c
Press Redial.
d
Press Fax Start.
NOTE
• In Real Time Transmission the automatic
redial feature does not work when you are
using the scanner glass.
• If you are sending a fax manually and the
line is busy, press Hook before performing
step c above.
• Redial will change to Pause when you
enter a fax number.
Dialling and storing numbers
Additional Dialling
7
Operations

Outgoing Call history

The last 30 numbers you sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to fax to, add to
the Address Book, or delete from the history.
a
Press Fax.
b
Press Call History.
c
Press Outgoing Call.
d
Press the number you want.
e
Do one of the following:
To send a fax, press Apply.

Press Fax Start.
 If you want to store the number,
press Edit and then press
Add to Address Book.
(See Advanced User's Guide:
Storing Address Book numbers from
Outgoing Calls.)
 If you want to delete the number from
the Outgoing Call history list, press
Edit and then press Delete.
Press Yes to confirm.
Press .
7
7
7
75