Loading Paper In The Manual Feed Slot - Brother MFC-J2510 Basic User's Manual

NOTE
• If you are using A3, Ledger or Legal size
paper, close the paper support flap of
tray #1.
• If you are finished using A3, Ledger or
Legal size paper and want to use A4 or
Letter size paper, take the paper out of the
tray. (If you lifted up the stopper to use
Legal size paper, lower the stopper.)
Move the slider to the right to unlock the
paper tray, and then shorten the tray.
Move the slider to the left to lock the paper
tray, and then put A4 or Letter size paper
into the tray.
CAUTION
When changing the tray size from A3,
Ledger or Legal size back to the original
size, be careful not to pinch your fingers
between gaps at the back of the tray.
Loading paper in the manual
feed slot
You can load special print media into this slot
one sheet at a time. Use the manual feed slot
to print or copy on A3, Ledger, Legal, A4,
Letter, Executive, A5, A6, envelopes,
Photo (10  15 cm), Photo L (89  127 mm),
Photo 2L (13  18 cm) and
Index Card (127  203 mm).
NOTE
• The machine automatically turns on
Manual Feed mode when you put paper in
the manual feed slot.
• If you are using paper that is longer than
A4, Letter size paper or envelopes with
the flap on the short edge, close the paper
support flap.
Loading paper
2
2
35