Configuring Radio Transmit Power - Cisco ISR Configuration Manual

Wireless isr and hwic access point
Table of Contents

Advertisement

Configuring Radio Transmit Power

Command
Step 4
end
Step 5
copy running-config startup-config (Optional) Save your entries in the configuration file.
Use the no form of the speed command to remove one or more data rates from the configuration. This
example shows how to remove data rates basic-2.0 and basic-5.5 from the configuration:
router# configure terminal
router(config)# interface dot11radio 0
router(config-if)# no speed basic-2.0 basic-5.5
router(config-if)# end
Configuring Radio Transmit Power
Radio transmit power is based on the type of radio or radios installed in your access point and the
regulatory domain in which it operates. To determine what transmit power is available for your access
point and which regulatory domain it operates in, refer to the hardware installation guide for that device.
hardware installation guides are available at cisco.com. Follow these steps to view and download them:
Browse to http://www.cisco.com.
Step 1
Click Technical Support & Documentation. A small window appears containing a list of technical
Step 2
support links.
Click Technical Support & Documentation. The Technical Support and Documentation page appears.
Step 3
In the Documentation & Tools section, choose Wireless. The Wireless Support Resources page appears.
Step 4
In the Wireless LAN Access section, choose the device you are working with. An introduction page for
Step 5
the device appears.
In the Install and Upgrade section, choose Install and Upgrade Guides. The Install and Upgrade Guides
Step 6
page for the device appears.
Choose the hardware installation guide for the device. The home page for the guide appears.
Step 7
In the left frame, click Channels and Antenna Settings.
Step 8
Table 2-2
Table 2-2
Translation between mW and dBm
dBm -1
2
5
6
mW
1
2
3
4
Cisco Wireless ISR and HWIC Access Point Configuration Guide
2-12
shows the relationship between mW and dBm.
7
8
9
10
11
5
6
8
10
12
Purpose
Return to privileged EXEC mode.
12
13
14
15
16
15
20
25
30
40
Chapter 2
Configuring Radio Settings
17
18
19
20
21
50
60
80
100 125 150 200 250
22
23
24
OL-6415-04

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hwic

Table of Contents