Service-Type Attribute - Cisco ISR Configuration Manual

Configuring and Enabling RADIUS
Table 7-6
Attribute ID
1
4
5
6
25
41
42
43
44
46
47
48
49
61
VSA (attribute 26)
VSA (attribute 26)
VSA (attribute 26)
VSA (attribute 26)
VSA (attribute 26)
VSA (attribute 26)
VSA (attribute 26)
VSA (attribute 26)
By default, the access point sends reauthentication requests to the authentication server with the
Note
service-type attribute set to authenticate-only. However, some Microsoft IAS servers do not support the
authenticate-only service-type attribute. Changing the service-type attribute to login-only ensures that
Microsoft IAS servers recognize reauthentication requests from the access point. Use the dot11 aaa
authentication attributes service-type login-only global configuration command to set the
service-type attribute in reauthentication requests to login-only.
Cisco Wireless ISR and HWIC Access Point Configuration Guide
7-20
Attributes Sent in Accounting-Request (stop) Packets
Description
User-Name
NAS-IP-Address
NAS-Port
Service-Type
Class
Acct-Delay-Time
Acct-Input-Octets
Acct-Output-Octets
Acct-Session-Id
Acct-Session-Time
Acct-Input-Packets
Acct-Output-Packets
Acct-Terminate-Cause
NAS-Port-Type
SSID
NAS-Location
Disc-Cause-Ext
VLAN-ID
Connect-Progress
Cisco-NAS-Port
Interface
Auth-Algo-Type
Chapter 7 Configuring RADIUS Servers
OL-6415-04