6.Configure Other Services - IBM High Performance Storage System HPSS Installation Manual

a variable named DB2_USE_LOCAL_RESYNC set to the value of 'true' when starting DB2 in order
for the aforementioned fileset operations to complete successfully:
csh & tcsh:
setenv DB2_USE_LOCAL_RESYNC true
sh & bash:
export DB2_USE_LOCAL_RESYNC=true
5.3.1.6. Configure Other Services
This menu configures various services such as Parallel FTP, Java security for SSM, and SSM start
scripts. To configure Other Services, perform the following steps:
1. From the "Root Subsystem Machine" submenu in the left panel, click on the "Configuration"
icon and then the "Other Services" icon. The following window will be shown:
2. By default, all boxes are selected. If some items have already been configured, un-select the
appropriate box to by-pass the re-configuration of that task. When satisfied with your
selections, select the "Configure Other Services" button and verify the command output
window returns with a status of "0". Depending upon the items selected, HPSS will be 1)
setting up /etc/services and inetd to allow HPSS ftp/pftp daemon to be invoked on this
system, 2) initialize the IEEE address file in /var/hpss/etc, 3) copy the SSM configuration
template files to /var/hpss/ssm.
3. If the configuration succeeds, you will see the following message in the command output
window:
## run command exited with status 0
Click the 'Done' button on the Command Output window to close the window.
HPSS Installation Guide
Release 6.2 (Revision 2.0)
July 2008
158