IBM High Performance Storage System HPSS Installation Manual page 279

SubStanza
SubStanza
SubStanza
SubStanza
SubStanza
SubStanza
HPSS Installation Guide
Release 6.2 (Revision 2.0)
Maximum Time Out = <value>
Value: Time in seconds
E.g. Maximum Time Out = 86400
Replaces -T option and hpss_option MTO time in ftpaccess.
Optional SubStanza specifying the maximum timeout in seconds.
Use UDP ONLY
E.g. UDP ONLY
Replaces -U option.
Optional SubStanza specifying use of UDP RPCs Only. Sets the
environment variable: RPC_SUPPORTED_PROTSEQS=ncadg_ip_udp
(HPSS only.)
Use Extended Registry Attributes
E.g. Use Extended Registry Attributes
Replaces -X option.
Optional SubStanza specifying use of the LDAP Registry for
authentication (bypassing the passwd file) and use of the HPSS.homedir
and HPSS.gecos Extended Registry Attributes (ERAs) for the users home
directory and accounting fields (if they are filled.)
Print Performance Data
E.g. Print Performance Data
Optional SubStanza specifying the printing of additional performance
numbers. (non-HPSS PFTP daemon only.)
Number of Ports = <value>
Values: 1 - 64
E.g. Number of Ports = 16
Optional SubStanza specifying the maximum stripe width allowed. (non-
HPSS PFTP daemon only.)
IOR Listen Port = <value>
E.g. IOR Listen Port = 19199
Optional SubStanza specifying the port to be used for the PDATA_PUSH
protocol. (HPSS only.)
July 2008
279