2.Update Hpss Configurations; Table 11. 6.2 Default Server Configuration Parameters - IBM High Performance Storage System HPSS Installation Manual

The default name of the SSM configuration file is ssm.conf. Its default location is the current
directory or, if not there, in $HPSS_PATH_SSM (/var/hpss/ssm by default). The name and location
may be overridden by the -m option to the hpssgui.pl script or by setting the value in the user's
environment.
The value of HPSS_SSM_SM_PORT_NUM can be obtained by connecting to the DB2 configuration
database (e.g. CFG) and issuing the following SQL statement:
% db2 select rpc_prog_num,rpc_prog_vers from hpss.server where
"desc_name='SSM System Manager'"
RPC_PROG_NUM RPC_PROG_VERS
------------ -------------
536870918
1 record(s) selected.
In this example, the HPSS_SSM_SM_PORT_NUM should be set to the value "536870918:1" for the
SSM client to successfully connect with the SSM server. The rpcinfo command can be used to verify
that a server is listening on this port.
6.3.20.2. Update HPSS Configurations
Perform this step on the root subsystem only.
Using the SSM GUI,
1. Mark the following servers non-executable:
NFS Daemon (not yet supported for this release)
•
Mount Daemon (not yet supported for this release)
•
MPS (to temporarily disable migration and purge)
•
2. Delete DMAP Gateway server, if configured
3. Review each HPSS server configuration and update them to match with the 6.2 default
configuration values shown in the following table:

Table 11. 6.2 Default Server Configuration Parameters

Server Type
Core Server
Location Server
Log Daemon
Log Client
Gatekeeper
HPSS Installation Guide
Release 6.2 (Revision 2.0)
1
Thread Pool Maximum
Size Connections
200
200
10
10
200
July 2008
Minimum
Database
Connections
200 10
200 3
10 0
10 0
200 1
Maximum
Database
Connections
50
10
2
2
5
222