IBM High Performance Storage System HPSS Installation Manual page 303

* HPSS_API_MAX_CONN
that
*
within
*
* HPSS_API_DEBUG
* HPSS_API_RETRIES
*
"retryable"
*
* HPSS_API_BUSY_DELAY
*
* HPSS_API_BUSY_RETRIES
*
*
*
*
* HPSS_API_TOTAL_DELAY
*
* HPSS_API_LIMITED_RETRIES
*
*
* HPSS_API_DMAP_WRITE_UPDATES - Used to control the frequency of the
*
*
*
* HPSS_API_REUSE_CONNECTIONS
*
*
*
* HPSS_API_USE_PORT_RANGE
*
*
*
client
* HPSS_API_RETRY_STAGE_INP
*
files
*
*
*
* HPSS_API_DISABLE_CROSS_REALM- Used to control cross-realm traversal
* HPSS_API_DISABLE_JUNCTIONS
* HPSS_API_SITE_NAME
*
* HPSS_API_AUTHN_MECH
*
* HPSS_API_RPC_PROT_LEVEL
*
*
**************************************************************************
*
*/
{ "AIXTHREAD_COND_DEBUG",
{ "HPSS_API_HOSTNAME",
{ "HPSS_API_DESC_NAME",
{ "HPSS_API_DEBUG_PATH",
{ "HPSS_API_MAX_CONN",
{ "HPSS_API_DEBUG",
{ "HPSS_API_RETRIES",
{ "HPSS_API_BUSY_DELAY",
{ "HPSS_API_BUSY_RETRIES",
HPSS Installation Guide
Release 6.2 (Revision 2.0)
- Defines the number of connections
are supported by the Client API
a single client process
- Used to enable debug messages
- Used to control the number of retries
when operations fail with a
return code
- Used to control the number of seconds
to delay between retry attempts.
- Used to control the number of retries
to be performed when a request fails
because the Core Server does not
currently have an available thread
to handle the request
- Used to control the number of seconds
to continue retrying a request
- Used to control the number of retry
attempts before a limited retry error
operation fails
cache invalidates that are issued to
the DMAPI file system while writing
to a file that is mirrored in HPSS
- Used to control whether TCP/IP
connections are to left open as long
as an HPSS file is open or are closed
after each read or write operation.
- Used to control whether HPSS Movers
should the configured port range
when making TCP/IP connection for
read or write operations for the
- Used to control whether retries are
attempted on when trying to open
in a Class of Service that is
configured for background staging on
open
- Used to control junction traversal
- Used to control which HPSS site
the client is connected
- Used to control the select of an
authentication mechanism
- Used to control the select of an
RPC protection level
"OFF",
"${HPSS_HOST}",
"Client Application",
"stdout",
"0",
"0",
"4",
"15",
"3",
July 2008
NULL},
NULL},
NULL},
NULL},
NULL},
NULL},
NULL},
NULL},
NULL},
303