Ntp Configuration Menu For Sip Phones; Ui Configuration Menu - Cisco 7975G Software Manual

Administration guide for cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs Also See for 7975G:
Table of Contents

Advertisement

Cisco Unified IP Phone Settings
Option
Network Locale
Network Locale
Version
NTP
Configuration
(SIP phones only)

NTP Configuration Menu for SIP Phones

The NTP Configuration menu displays information about the NTP server and mode configuration used by
SIP phones. The following table describes the options on this menu.
Table 22: NTP Configuration Menu Options
Option
NTP IP Address 1
NTP IP Address 2
NTP Mode 1
NTP Mode 2

UI Configuration Menu

The UI Configuration menu displays the status of various user interface features on the phone. The following
table describes the options on this menu.
Description
Network locale associated with the
phone user. The network locale
identifies a set of detailed information
that supports the phone in a specific
location, including definitions of the
tones and cadences used by the phone.
Version of the network locale loaded on
the phone.
Provides access to the NTP
Configuration Menu. For more
information, see
NTP Configuration
Menu for SIP Phones, on page
Description
IP address of the primary NTP
server.
IP address of the secondary or
backup NTP server.
Primary server mode. Supported
modes are Directed Broadcast and
Unicast.
Secondary server mode. Supported
modes are Directed Broadcast and
Unicast.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
To change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Display only. Cannot configure.
Display only. Cannot configure.
93.
To change
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
Communications Manager 9.0 (SCCP and SIP)
UI Configuration Menu
93

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7971g-ge7970g7965g7945g

Table of Contents