Security Configuration Menu - Cisco 7975G Software Manual

Cisco Unified IP Phone Settings
Option
IPv6 Load Server
IPv6 Log Server
Related Topics
Display Settings Menu, on page 62
Network Configuration Menu, on page 66

Security Configuration Menu

The Security Configuration that you access directly from the Settings menu provides information about various
security settings. It also provides access to the Trust List menu. This menu indicates if the CTL or ITL file is
installed on the phone.
Description
Used to optimize installation time for
phone firmware upgrades and offload the
WAN by storing images locally, which
negates the need to traverse the WAN
link for each phone upgrade.
You can set the Load Server to another
TFTP server IP address or name (other
than the IPv6 TFTP Server 1 or IPv6
TFTP Server 2) from which the phone
firmware can be retrieved for phone
upgrades. When the Load Server option
is set, the phone contacts the designated
server for the firmware upgrade.
Note The Load Server option allows
you to specify an alternate TFTP
server for phone upgrades only.
The phone continues to use IPv6
TFTP Server 1 or IPv6 TFTP
Server 2 to obtain configuration
files. The Load Server option
does not provide management of
the process and of the files, such
as file transfer, compression, or
deletion.
Indicates the IP address and port of the
remote logging machine to which the
phone sends log messages. These log
messages help to debug the peer to peer
image distribution feature.
The remote logging setting does
Note
not affect the sharing log
messages that are sent to the
phone log.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Security Configuration Menu
To change
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Communications Manager 9.0 (SCCP and SIP)
109