Genie EZPZ User Manual page 84

1. Go to SETUP>NETWORK. Set NETWORK TYPE as DHCP and DDNS SERVER as ON. And
select one from bestddns.com, okddns.com and ddnscenter.com - after setting to DDNS1.
2. Go to Setup menu of the Router and open TCP port 5445 and 80 using Port Forwarding.
3. Confirm the Mac address and Serial No. from the label on the rear panel of the EZPZ NVR.
4. Open the web browser and log on http://www.bestddns.com. Please log on http://www.okddns.com
in Korea and http://www.ddnscenter.com in USA.
 MAC Address: Input the Mac address (Example: 0002690XXXXX without any spaces).
 Serial Number: Input the Serial No. (Example: EZPZ1100XXX without any spaces).
5. Domain Name: Input the Domain Name for your NVR system
6. Click the DUPLICATION CHECK button to see if the domain name is available.
7. If you see "You can use the Domain name you entered" then click RETURN and click the
REGISTER button to complete the registration.
8. Run the network client software on the supplied CD.
84