Table of Contents
Advertisement
4-5. Setup – DEVICE Mode
In the SETUP menu, select the DEVICE tab and the device menu appears, as pictured below. Navigate
through the menu items using the mouse, or the buttons on the remote control, and change the value of the
menu items.
Item
ALARM OUT
CONTROLLER
CHANNEL
AUDIO SOURCE
KEY TONE
REMOTE CONTROL ID
Figure 4.5.1. DEVICE Setup Screen
Table 4.5.1. Menu Items in DEVICE Setup Screen
Only one Alarm Output is available.
Set the alarm dwell time from between 5 to 60 seconds, or infinite.
Set the controller type, speed (baudrate) and ID.
Select specified channel audio source setup.
Select IP CAM Audio or Local Audio.
Enable/disable key tone for front panel usage.
Set the remote control ID.
1. Select ID.
2. Input the remote control ID number.
3. An icon on the Live Screen indicates if the remote control ID is
synchronised. The options are from 0 to 99
Description
30
Advertisement
Table of Contents
