Genie EZPZ User Manual page 35

SERVER TYPE: Select GMAIL, HOTMAIL, AOL, YAHOO or MANUAL
MAIL TO: Enter the appropriate e-mail address to enable sending e-mail reports using
the virtual keyboard.
MAIL FROM: To set the e-mail address sent to the destination host.
TEST : E-mail settings sends a test mail to the registered account
SYSTEM
EVENT
NOTIFICATION
HEALTH CHECK – OFF, ON
(Allows the user to set MAIL STATUS period): DAILY or WEEKLY or MONTHLY
EVENT AND NOTIFICATION – OFF, ON
(Allows the user to set EVENT NOTIFICATION ON or OFF)
HEALTH CHECK / RESTART / SHUTDOWN / PANIC RECORD
ALARM-IN – Enable Email notification when the camera detects sensor input.
MOTION DETECTION – Enable Email notification when the camera detects motion.
NO CONNECTION – Enable Email, Beep and Alarm output notification when the
camera signal is lost.
HDD TEMPERATURE – Enable Email, Beep and Alarm output notification when the
HDD temperature is too high.
MAIL SERVER: Enter the appropriate mail server information.
MAIL PORT: Assign Mail Port number.
SECURE OPTION: Select the secure mail server connection method (SSL or TLS).
ID: Enter the appropriate mail server ID.
PASSWORD: Enter the appropriate mail server PASSWORD
- Enable Email notification in the event a problem occurs with the EZPZ NVR.
35