Table of Contents
Advertisement
These precautions must be followed for safety reasons
Warning
Do not use if the unit emits smoke, strange sounds, or odours are emitted.
Make sure the power cable is not damaged.
Make sure there is no dust accumulation on the power plug or the outlet.
Disassembly is prohibited
Do not place any foreign objects inside the devices.
Do not allow the NVR unit to get wet.
Do not use during thunder storms without appropriate lightning protection.
Do not install the devices in unstable positions.
Do not expose to shocks or vibration.
Do not use this unit in areas where it is exposed to the possibility of explosion.
Caution
Do not pull on the power cable when removing the power plug from the outlet.
Do not touch the power plug with wet hands.
Make sure the cables are connected properly.
Do not place heavy objects on connected units.
Never move this unit while power is switched on.
Remove the power plug from the outlet if the unit is to remain unused for long periods of time.
Do not block the cooling fans or air ducts.
Do not expose to extreme temperatures or humidity changes.
Warning
Installation and servicing should only be performed by qualified and experienced personnel.
Turn off the power of the NVR when connecting cameras, audio or sensor cables.
The manufacturer is not responsible for any damage caused by improper use of the product or failure to
follow instructions for the product.
The manufacturer is not responsible for any problems caused by, or resulting from, the user physically
opening the NVR for examination or attempting to fix the unit. The manufacturer may not be held liable for
any issues with the unit if the warranty seal is removed.
For NVR PoE models with a PoE Switch, it's strongly recommended that the 48V connector is inserted into
the PoE Switch before the AC cable is attached to the adaptor.
3
Advertisement
Table of Contents
