ID: Email User ID.
o
PASSWORD : Email User Password.
o
MAIL TO: Input the appropriate email address to enable sending e-mail reports
o
MAIL FROM (Return Mail Address): Set the source e-mail address to be notified to the
o
destination.
SEND MAIL TEST : E-mail settings to send a test mail to the registered account
•
SYSTEM EVENT NOTIFICATION
•
Allows the user to set EVENT NOTIFICATION ON or OFF.
HEALTH CHECK
o
(Allows the user to set MAIL STATUS periodically): DAILY or WEEKLY or MONTHLY.
HDD TEMPERATURE
o
HDD BAD SECTOR
o
HDD ALMOST FULL
o
HEALTH CHECK / RESTART / SHUTDOWN / PANIC RECORD
o
Enable Email notification in the event a problem occurs with the NVR.
ALARM-IN: Enable Email notification when the camera detects Sensor Input.
o
MOTION DETECTION: Enable Email notification when the camera detects Motion.
o
NO CONNECTION: Enable Email Beep and Alarm output notification when the camera
o
signal is lost.
HDD TEMPERATURE: Enable Email Beep and Alarm output notification when the HDD
o
reaches the maximum temperature.
HDD BAD SECTOR: Enable Email notification when the HDD has bad sectors.
o
HDD ALMOST FULL: Enable Email notification when the HDD is almost full.
o
HDD FULL: Enable Email notification when the HDD is full.
o
HDD FAILURE: Enable Email, Beep and Alarm Output notification when the HDD fails.
o
66