Table of Contents
Advertisement
CLIENT
Enable/Disable remote access through the network.
ACCESS
NTP
NTP (Network Time Protocol) which synchronises the time of the computer system over
variable-latency data networks.
PRIMARY SNTP SERVER: Input the address of the primary NTP time-server.
SECONDARY SNTP SERVER: Input the address of the secondary NTP time-server.
TIME ZONE: NTP synchronises with GMT (Greenwich Mean Time) regardless of
geography; user must select time difference from GMT.
CONNECTON MODE: Select the NTP time-server connection mode from TIME,
INTERVAL, and ONCE.
CONNECTION PERIOD
EZPZ NVR sends an E-MAIL Notification when the NTP server time is faster than
the system time; with the message shown below.
"NTP server time is faster than the system time.
In this case, NTP server time is ignored to protect the user data.
User must set the time manually.
SYSTEM TIME: Mon Oct 10 13:46:49 2011
SERVER TIME: Mon Oct 10 13:33:12 2011
NVR ID: NVR
IP ADDRESS: 172.16.2.77"
SEND EMAIL
Enable/disable the send e-mail function (ON/OFF).
-
TIME – Refresh the time at the designated time (e.g. 1am)
-
INTERVAL – Every 1 ~ 24 hours
-
ONCE – Synchronises time only once. NTP will not synchronise unless the
Connection Mode is changed.
34
Advertisement
Table of Contents
