6-4. Setting Tool screen
This PC EVR software has Setting Tool screen.
< How to display the Setting Tool screen. >
1. Select "SYSCON(S)" section after start up the PC EVR software, and click "OK" button.
2. Select "Setting Tool" in "Tools(W)" menu, Setting Tool screen will appear on screen.
< Function of the Setting Tool screen. >
The following confirmation and the setup can be performed on a Setting Tool screen.
● Setting and confirmation of Date and Time of internal clock.
● Hour Meter display.
● Display operation of a Service menu and the DIAGNOSTIC menu.
● Software version display.
● 1394 UID display.
● Setting of destination.
● Setting of Recording format and system.
● Factory initialize.
● Power supply reboot.
Setting and confirmation of
Date and Time of internal clock
Hour Meter display
Display operation of a
Service menu and the
DIAGNOSTIC menu.
Software version display.
1394 UID display.
INF-26
Power supply reboot.
Setting of destination.
Factory Initialize
Setting of Recording
format and system.