Ccd Flex Board; Rside1 Board; Adjustment After Replacement Of Major Parts; Camera Adjustment - Panasonic AG-HPX500 Service Manual

11-2-5. CCD FLEX board

CAMERA Adjustment is required.
Regarding required adjustment items, refer to item "11-3-1. CAMERA Adjustment" (page INF-51).

11-2-6. RSIDE1 Board

Set the Internal clock`s date and time.
Refer to item "Setting the Date and Time of Internal Clock" of operation instructions and item "6-4-1.
Setting and confirmation of the Date and Time of the Internal Clock" for the setting method.

11-3. Adjustment after replacement of major parts

When the following parts are exchanged showing in the table, the adjustment and confirmation are required follow
the items shown by mark "X" in the table.
The adjustment procedure have been described to item "3. Adjustment after replacement of major parts" on
section 3 (Electrical adjustment procedure).

11-3-1. CAMERA Adjustment

ADJISTMENT ITEM
D-Terminal Output Level Adj.
Video Terminal Output Level Adj.
Int. Frequency Adj.
Blemish Compensation. Adj.
SUB Level Adj.
White Shading Adj. (1)
Standard Sensitivity Adj.
White Balance Adj.
White Shading Adj. (2)
ND FILTER Compensation
X: Adjustment / Confirmation Required
The method of data backup (EEPROM) has been described to the item "7. Save and write EEPROM data" of
service information (SECTION 1).
CCD FLEX Board is exchanged.
Overall Check
RSIDE1 Board is exchanged.
Overall Check
*CAMERA Board
When When no
back up back up
EEPROM EEPROM
data data
X X
X X
X X
X
X
X
X
X
X
X
X
INF-51
PART NAME
Head Optical Ass'y
Camera
CCD FLEX
Ass'y*
SENSOR1
Board
X X
X
X
X
X
X
X
X
X
X
X
X
X
Front Panel Ass'y
POS FRONT
SW BUTTON
Board Board
REC
Board