Chicago Electric 91213 Operating Instructions Manual page 14

5. Turn the Engine Power Switch (2) to its "ON" position. (See Figure F.)
ENGINE
POWER
SWITCH
(2)
ON
OFF
FIGURE F
6. Hold the Start Handle (41A) loosely and pull it slowly several times to allow the
gasoline to flow into the Engine's carburetor. Then hold the Start Handle firmly
and pull the rope hard and fast. Pull the rope all the way out, using two hands if
necessary. If necessary pull the rope several times until the Engine starts.
(See Figure G.)
7. Allow the Engine to run for several seconds. Then, open the Choke Lever (21A)
all the way. (See Figure E.)
START
HANDLE
(41A)
FIGURE G
SKU 91213
FUEL TANK (32)
PAGE 14
120 VOLT
DUEL
OUTLETS
(6)