Touchpad Button Board - HP Pavilion G6 Maintenance And Service Manual

TouchPad button board

Description
TouchPad button board (includes bracket and cable)
Before removing the TouchPad button board, remove the following components:
1.
Battery (see
2. Service door (see
3.
Hard drive (see
4. Optical drive (see
5.
Keyboard (see
6.
Top cover (see
Remove the TouchPad button board:
1. Release the ZIF connector (1) to which the TouchPad button board cable is attached, and then
disconnect the cable (2) from the TouchPad.
2. Slide the TouchPad bracket to the left (3) and then remove it.
3.
Remove the TouchPad button board (4).
Reverse the above procedure to reassemble and install the TouchPad button board.
Battery on page 41)
Service door on page
Hard drive on page
Optical drive on page
Keyboard on page 51)
Top cover on page 53)
42)
43)
45)
Component replacement procedures
Meijer.com
Spare part number
640885-001
59