Security cable lock
NOTE:
The security cable lock is included with the base enclosure, spare part number 639569-001.
Before removing the security cable lock, remove the following components:
1.
Battery (see
2.
Service door (see
3.
Hard drive (see
4.
Optical drive (see
5.
Keyboard (see
6.
Top cover (see
Remove the security cable lock:
1.
Remove the two Phillips 4.0 x 2.5 screws that secure the security lock to the base enclosure.
2.
Lift the security lock straight up to remove it from the computer.
Reverse this procedure to install the security cable lock.
Battery on page
41)
Service door on page
Hard drive on page
Optical drive on page
Keyboard on page
51)
Top cover on page
53)
42)
43)
45)
Component replacement procedures
Meijer.com
61