Areas Of Application - Bosch FAS-420-TM Operation Manual

10 en | Technical Specifications
2.2

Areas of Application

Thanks to their detection principle, FAS-420-TM aspirating smoke detectors represent an
extremely versatile fire protection solution.
Principle
Air samples are taken from the monitoring range by a pipe system with defined aspiration
borings and then fed to the detector module.
This is especially well-suited for areas in which point-type detectors cannot be used or can
only be used under certain circumstances. These include:
–
–
–
–
–
–
–
–
–
Space protection
The FAS-420-TM series is suitable for monitoring areas such as
–
–
–
–
–
Figure 2.1 Principle of area monitoring with FAS-420-TM series Aspirat-
ing Smoke Detectors
Area monitoring with air-conditioning
Area monitoring occurs
–
–
–
–
F.01U.088.878 | 4.1 | 2010.11
Areas that are difficult to access, in which point detectors are difficult to install and
maintain
Air-conditioned areas
Areas that require the earliest detection possible
Areas with a height greater than that allowed for point detectors
Areas in which point detectors are not desired for aesthetic reasons
Areas in which strong electromagnetic fields occur
Areas that are exposed to high or low temperatures
Areas with contaminated air that require filter elements
Areas that must be protected against vandalism.
Those with double floors, false ceilings
Tunnels, ducts, barely accessible hollow spaces
Storage, high-rise warehouses, elevator shafts
Museums, cultural institutions
Hotel rooms, hospital rooms, offices, prison cells, train compartments
1
2
In rooms with air-conditioning for service rooms etc.
In ventilation ducts
In double floors, false ceilings
In IT rooms, e-distributor rooms, transformer cells
Operation Guide
E 1 0 9
C D 8 6 7
B 5 4 3 2
A 1
T I T A N U S M I C R O · S E N S ®
FAS / FCS
E 9 1 0
C D 5 6 7 8
B 2 3 4
A 1
T I T A N U S M I C R O · S E N S ®
FAS-420-TM Aspirating Smoke Detector
1 Room pipe system
2 Double-floor pipe system
Bosch Sicherheitssysteme GmbH