Bosch FAS-420-TM Operation Manual page 11

FAS-420-TM Aspirating Smoke Detector
–
–
Figure 2.2 Monitoring options for an air-conditioning unit or an air-
conditioning duct (depiction of principle)
The FAS-420-TM Aspirating Smoke Detector can be used for early fire detection in areas with
special-purpose air conditioning.
Thanks to its high sensitivity, expensive goods and equipment can be monitored reliably. The
aspirating smoke detectors from the FAS-420-TM series are therefore especially suitable for
areas of application:
–
–
–
–
Equipment protection
Equipment monitoring involves the direct monitoring of an object. These can be unventilated
or force-cooled units or cabinets, e.g.
–
–
–
Bosch Sicherheitssysteme GmbH
On air-conditioning units (Figure 2.2) or
In the bypass in air-conditioning ducts.
FAS / FCS
Where early intervention is essential due to a high value concentration
Where equipment must always be operational
Where highly sensitive detection is necessary (e.g. in areas where, due to built-in filter
elements, the air contains a low concentration of smoke particles)
Where high air-exchange rates prevail.
Distributor cabinets, switching cabinets
Telephone-switching equipment
Measuring, control, and regulation equipment.
Operation Guide
1
FAS / FCS
2
FAS / FCS
Technical Specifications | en
1 Air-conditioning duct
2 Air-conditioning unit
F.01U.088.878 | 4.1 | 2010.11
11