Connection Of External Equipment - Panasonic TY-FB9TU Operating Instructions Manual

Attaching the ferrite core
1
Pull back the tabs
(in two places) to
open.
Note
If the ferrite core is not attached, noise may occur in the video or audio.
Handling the antenna cable
To avoid noise in the video, hold the antenna cable correctly.
Back
Route away from
the display.

Connection of external equipment

Monitor
Display
Note
• Peripheral equipment and optional cables/adapters sold separately unless otherwise indicated.
• S-video signal input (S VIDEO IN) is prior to composite signal input (VIDEO IN).
• A light gun game console using CRT TV's electron-gun scanning system is not compatible with a display.
• VIDEO OUT is available only when "VIDEO1" is selected as the input source for INPUT 2 (see page 6).
2
Amplifier to speaker system
Mini-plug (M3) stereo
MATE
VCR
Less than 10 cm (4")
Put the cable
and close.
Back
Do not route
close to the
display.
Digital
interface port
Mate Box Clone Box
F-type antenna adapter (included)
DVD player
Connection
Front
Do not pass
around the front
of the display.
VHF Antenna
UHF Antenna
Mixer
5