ZyXEL Communications Prestige 660H Series User Manual page 53

Table 3 Web Configurator Screens Summary (continued)
LINK
UPnP
Logs
Media Bandwidth
Management
Maintenance
System Status
DHCP Table
Any IP Table
Wireless LAN
Diagnostic
Firmware
LOGOUT
Chapter 2 Introducing the Web Configurator
SUB-LINK FUNCTION
Use this screen to enable UPnP on the Prestige.
Log Settings Use this screen to change your Prestige's log settings.
View Log Use this screen to view the logs for the categories that you
selected.
Summary Use this screen to allocate an interface's outgoing capacity to
specific types of traffic.
Class Setup Use this screen to define a bandwidth class.
Monitor Use this screen to view bandwidth class statistics.
This screen contains administrative and system-related
information.
This screen displays DHCP (Dynamic Host Configuration
Protocol) related information and is READ-ONLY.
Use this screen to allow a computer to access the Internet
without changing the network settings of the computer, when the
IP addresses of the computer and the Prestige are not in the
same subnet.
Association List This screen displays the MAC address(es) of the wireless
stations that are currently logged in to the network.
General These screens display information to help you identify problems
with the Prestige general connection.
DSL Line These screens display information to help you identify problems
with the DSL line.
Use this screen to upload firmware to your Prestige
Click this label to exit the web configurator.
Prestige 660H/HW Series User's Guide
52