Remote Management And Nat; System Timeout - ZyXEL Communications Prestige 660H Series User Manual

37.3 Remote Management and NAT

When NAT is enabled:
• Use the Prestige's WAN IP address when configuring from the WAN.
• Use the Prestige's LAN IP address when configuring from the LAN.

37.4 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).
The Prestige automatically logs you out if the management session remains idle for longer
than this timeout period. The management session does not time out when it is continuously
updating the status in menu 24.1 or when sys stdio has been changed on the command
line.
Chapter 37 Remote Management
Prestige 660H/HW Series User's Guide
338