Configure Router Bgp Neighbor Update_Source - Alcatel Router User Manual

80
Chapter : BGP4 Configure Commands

configure router bgp neighbor update_source

This command configures the source of BGP TCP connections for a specified neighbor as the IP
address specified, instead of the IP address of a physical interface.
This address will be used as the source address for routing updates.
syntax:
[ no ] update_source < IP address >
example:
- /configure/router/bgp 10/neighbor 101.101.1.2 4> update_source 10.10.2.1
Alcatel host
applicable systems:
All models.
Router User Guide