Configure Policy Route_Map Set Distance - Alcatel Router User Manual

32
Chapter : Policy Commands

configure policy route_map set distance

Router User Guide
This command sets the BGP protocol preference for the path attribute.
parameter definition
distance Default preference value
The range is 0 - 255.
syntax:
[ no ] set distance distance < n >
example:
- /configure/policy/route_map Block100 1> set distance 20
Alcatel host
related commands
configure policy route_map set as_path
configure policy route_map set community
configure policy route_map set local_preference
configure policy route_map set metric
configure policy route_map set metric_type
configure policy route_map set origin
applicable systems:
All models.