Configure Router Ospf Interface Neighbor - Alcatel Router User Manual

Running H/F 2

configure router ospf interface neighbor

This command sets up an OSPF neighbor router for an interface that is used on a non-broadcast
network.
parameter
ip address
priority
syntax:
[ no ] neighbor < IP address > [ priority < n > ]
example:
- /configure/router/ospf/interface toBoston> neighbor 100.22.12.2 7
Alcatel host
related commands
configure router ospf interface authentication
configure router ospf interface cost
configure router ospf interface dead_interval
configure router ospf interface hello_interval
configure router ospf interface network
configure router ospf interface poll_interval
configure router ospf interface priority
configure router ospf interface retransmit_interval
configure router ospf interface transmit_delay
applicable systems:
All models.
definition
The IP address of the neighbor router
Sets the router priority for a non-broadcast neighbor.
The range is 0 - 255; the default is 1.
#
Router User Guide