Configure Router Rip Interface Neighbor - Alcatel Router User Manual

192
Chapter : RIP Configure Commands

configure router rip interface neighbor

Router User Guide
This command specifies a RIP neighbor for a specific interface.
Use this command multiple times to add multiple neighbors. When neighbors are specified, RIP
updates are unicast to those neighbors (and not broadcast or multicast on that segment).
parameter definition
ip_address Neighbor IP address
syntax:
[ no ] neighbor < ip_address >
example:
- /configure/router/rip/interface ethernet0> neighbor 192.168.31.2
Alcatel host
This example configures IP address 192.168.31.2 as a RIP neighbor of interface
Ethernet 0.
related commands
configure router rip interface authentication
configure router rip interface distribute_list
configure router rip interface metric
configure router rip interface mode
configure router rip interface passive
configure router rip interface split_horizon
applicable systems:
All models.