Registering Users; Install Version Checking - Konica Minolta magicolor 8650 User Manual

15
15.4.3

Registering users

To register users, connect this machine to a computer, and use PageScope Data Administrator.

Install version checking

1
From the "Help" menu of PageScope Data Administrator, select "Version".
2
Click [Plug-in Version].
3
In [Plug-in information list], check the plug-in version of PageScope Data Administrator.
Note
For a "3.x" version machine, this software is not available. Install "4.x".
If PageScope Data Administrator V3.x is installed, it is removed when V4.x is installed.
Note
This software is available for a "4.x" plug-in version machine.
!
Detail
Registered user data is stored on the hard disk of the machine. If the user authentication method on the
machine is changed or the hard disk is reformatted, the registered user data is erased.
Note
In order to use PageScope Data Administrator, settings must be specified on the machine and the setup
procedure must be performed. The setup procedure includes installing this device's BioDriver(USB-
Driver), then installing PageScope Data Administrator Bio Plugin.
Reminder
PageScope Data Administrator ver. 4.0 or later must first be installed on the computer. For details on
the operating environment and installation procedure for PageScope Data Administrator, refer to the
user manual for the PageScope Data Administrator.
15-10 EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
Authentication unit (Biometric type AU-101)
magicolor 8650