Wireless Communication Setting Initializing Mode; Wireless Communication Setting Initializing Mode - Epson TM-P60II Technical Reference Manual

Wireless Communication Setting Initializing Mode

You can initialize the wireless communication settings by running this mode.
When you run this mode with a Wi-Fi model connecting with the wireless LAN interface, the
wireless LAN setting will be initialized.
When you run this mode with a Bluetooth model connecting with the Bluetooth interface,
the Bluetooth setting will be initialized.
When you run this mode with a Wi-Fi/Bluetooth model connecting with the USB interface,
nothing will be initialized.
Starting the wireless communication setting initializing mode
Follow the steps below to run this mode.
1
Install the roll paper.
2
Close the roll paper cover.
3
While pressing the Feed button, turn the power on. (Keep pressing the
button until the printer starts printing.)
The printer starts printing the current status of the printer.
When the printer finishes printing the printer status, the following message is printed and
the Paper LED flashes. (The printer is now in the self-test wait mode.):
4
Press the Feed button. (Keep pressing the button until the printer starts
printing.)
The printer starts printing instructions.
5
After the printing has been completed, press the Feed button 4 times.
6
Press the Feed button again. (Keep pressing the button until the printer
starts printing.)
The printer starts printing instructions. Follow them.
70
"Select Modes by pressing Feed button.
Continue SELF-TEST: Less than 1 second
Mode Selection : 1 second or more"