Bluetooth Interface - Epson TM-P60II Technical Reference Manual

Hide thumbs Also See for TM-P60II:

Table of Contents

Configure the [Network] settings and the [TCP/IP] settings.

Disconnect the USB cable, turn off the printer, and then turn it back on.

Be sure to disconnect the USB cable, turn off the printer, and then turn it back on after using

EpsonNet Config via the USB interface.

If you need to configure other settings, such as Certificate Import, use EpsonNet Config

(web version). For information about EpsonNet Config (web version), see

EpsonNet Config (Web Version)" on page

Bluetooth Interface

If your printer is the Bluetooth model, Bluetooth connection is available. For Windows, use

EPOSN TM Bluetooth Connector, which is a utility to easily pair a terminal and the printer.

TM Bluetooth Connector is a utility to establish only one computer-printer pairing. Using this

utility deletes the existing pairing information (of the printer to be paired only). To pair a

computer with more than one printer, use the Windows function for pairing.

• The device name and passkey are initially set as follows:

∗ Device name: TM-P60II_xxxxxx*

*xxxxxx refers to the last 6 digits of the serial number labeled on the back of your

printer.

∗ Passkey: 0000

• For detailed information about EPSON TM Bluetooth Connector, see the TM Bluetooth

Connector User's Manual.

• The device name and passkey are editable with the TM-P60II Utility.

61.

Chapter 2 Setup

"Starting

Table of Contents