Electrical Characteristics - Epson TM-P60II Technical Reference Manual

Electrical Characteristics

• Be sure to install the battery in the printer. The printer does not operate with the optional
power unit only.
• Always use a limited power source (LPS) for the printer.
• Be sure to use the optional PS-11 as the power supply unit.
Power supply (Lithium-ion battery)
Power voltage
Power unit (option)
Continuous Wi-Fi models
2
operating time*
Bluetooth models
*1: This is the input voltage required to charge the battery with the printer.
*2: Test conditions:
∗ Using a fully charged new battery
∗ Printing ANK 42 columns × 20 lines + 6 line feeding + autocutting
∗ With interval of printing once per 2.5 minutes
∗ At 25°C {77°F}
∗ Printing density: 100%
∗ Access point: CISCO AIR-LAP1142N-P-K9
∗ Wireless communication conditions: Beacon interval of 100 ms, DTIM interval of 5, and no broadcast.
∗ From when the battery is fully charged until when the battery remaining charge is reduced to approx. 10%.
Above continuous operating times will vary depending on changes in the use environment.
Model: OT-BY60II
Rated voltage: DC 7.4 V
Capacity: 2000 mAh
1
Input voltage* :
DC 24 V/Max. 1.5 A or DC 12V/Max. 1 A
Model: PS-11
Output voltage: DC 24 V
Input voltage: AC 100 V to 240 V
Approx. 14 hours
Approx. 46 hours
Chapter 1 Product Overview
29
1