Notes On Use - Epson TM-P60II Technical Reference Manual

Communication Speed
• IEEE802.11a (5 GHz): Automatic change
• IEEE802.11b (2.4 GHz): Automatic change
• IEEE802.11g (2.4 GHz): Automatic change
• IEEE802.11n (2.4 GHz): Automatic change (65 Mbps at maximum)
• IEEE802.11n (5 GHz): Automatic change (65 Mbps at maximum)
Security
Security can be selected from among the following:
• WEP
• WPA
• WPA2-Personal/Enterprise
Initial settings
Parameter
Communication standard
Network mode
SSID
WAP certification
Encryption
Passphrase
Notes on Wireless LAN Connection
Because not all the combinations of the printer and wireless LAN devices have been checked for
operation, the operation of the printer in combination with all the wireless LAN devices is not
guaranteed. Especially in the ad-hoc mode, the printer may not operate normally, depending on
the combination of the device to connect with. Be sure to carry out through evaluation of the
operation before use.

Notes on use

• When you initialize or change the printer settings, the printer is reset to reflect the settings. It
may take about 1 minute depending on the network settings or environment. Also, your
application may indicate power off during the time waiting for reset. In that case, wait for
about 1 minute, and then reconnect to the printer.
Setting value
802.11b/g/n
Infrastructure mode
EpsonNet
WPA2-Personal
AES
EpsonNet
Appendix
83