Modem Settings - Cradlepoint MBR1400 Series Product Manual
Mission-critical broadband router
Hide thumbs
Also See for MBR1400 Series:
- Product manual (272 pages) ,
- User manual (84 pages) ,
- Setup manual (29 pages)
Table of Contents
Advertisement
MBR1400| USER MANUAL Firmware ver. 3.3.0
CRADLEPOINT
7.6 Modem Settings
This section shows all attached modems
and allows you to change settings. If you
have a 3G/4G dual-mode modem it will
show both modems using the same USB
port.
Update/Activate a Modem
7.6.1
Some 3G modems can be updated and activated while plugged into the router. Updates and activation methods vary by
modem model and service provider. Possible methods are: PRL Update, Activation, and FUMO. All supported methods
will be displayed when you select your modem and click ―Update/Activate‖. If no methods are displayed for your device
then you will need to update and activate your device externally.
To update or activate a modem, select the checkbox next to the device and click ―Update / Activate‖.
The modem does not support Update/Activate
methods: A message will state that there is no support
for PRL Update, Activation, or FUMO.
© 2011 CRADLEPOINT, INC.
PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 102
Advertisement
Table of Contents
