W I F I As Wan Settings; Ode Only ) - Cradlepoint MBR1400 Series Product Manual

MBR1400| USER MANUAL Firmware ver. 3.3.0
CRADLEPOINT
7.8 WiFi as WAN Settings (Advanced Mode only)
When WiFi as WAN is enabled and configured the router will use a remote WiFi access point for internet connectivity. In
other words, external WiFi—from a hotel for example—can be used as the internet source for your own private network.
When enabled in the WiFi as WAN Settings page, the MBR1400 will find possible WiFi sources that you can select and
add. Unless the WiFi source is on an unprotected network, you will need to know the password or key.
All CradlePoint routers and some other routers use the same default IP address for the primary network, 192.168.0.1. If
you attempt to set up WiFi as WAN and there is an ―IP conflict,‖ you need to change the IP address. The router is
attempting to use the same IP address for both WAN and LAN, which is impossible. Go to Network Settings → WiFi /
Local Networks. Select the network and click Edit. You can change the IP address under IP Settings. For example, you
might change 192.168.0.1 to 192.168.1.1.
Saved Profiles:
This is a list of WiFi networks that have already
been configured as WAN sources. The router will
attempt to connect to any of these access points
using the password you have configured. If more
than one access point is in range, then the router
will connect with the highest priority network.
7.8.1 Site Survey
This is a list of WiFi networks that the router can currently find, along with information about the network such as its mode
and channel. If you click on a network in the Site Survey, you can import it as a saved profile. You can sort the list based
on any of the fields by clicking on the field name.
Click ―Refresh‖ if a WiFi network to which you want to connect is invisible. Site Survey only operates on the band—2.4
GHz or 5.0 GHz—that is currently configured in the WiFi advanced settings. In order to connect to networks in a different
band, first switch the WiFi settings to that band (Network Settings → WiFi / Local Networks in Advanced Mode).
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 119