6.5
Replacing front axle
CAUTION! Accident hazard.
• Secure the scooter against rolling away.
NOTE:
When disassembling, note the position of small parts such as screws and washers. Put small
parts down so that they can be reassembled in the right sequence.
NOTE:
The front axle can only be replaced on the 3-wheel version. The 4-wheel version does not have a
replaceable axle.
Requirements:
•
Open spanner, 17 mm.
•
Open spanner, 19 mm.
•
Supporting wooden block
•
Remove the seat.
•
Remove motor cover.
•
Separate battery cable.
•
Place a supporting wooden block under the
front part of the frame so that the front wheel
is no longer touching the floor.
•
Loosen axle bolts (1) simultaneously on both
sides.
•
Pull front axle slowly out.
•
Replace front axle.
•
Reassembly of the axle takes place in
reverse order
•
Check function (trial run).
24