6.12
Replacing the potentiometer
CAUTION! Burn and scald hazard if power cable is short-circuited!
• Interrupt the power supply by removing the battery plugs before you start work on the
electronic system.
CAUTION! Risk of accidents!
• The new potentiometer must be set to the middle position before inserting. Potentiometers
which are not in the middle position can result in dangerous driving situations!
Requirements:
•
Phillips screwdriver
•
Digital multimeter
•
Allen key 2m
•
Remove the seat.
•
Remove motor cover.
•
Disconnect battery cable (1).
•
Remove screws (1) below operating
console.
•
Remove operating console and fold
upwards.
•
Remove screws (3) on drive lever (2) and
remove drive lever.
•
Disconnect potentiometer plug (1) from the
operating console.
37