Making 3-Way Intercom Calls; Making 4-Way Intercom Calls; Using Click-To-Link Intercom - Cardo Systems G9 PowerSet User Manual

Bluetooth communication and entertainment system for snowmobile helmets
Hide thumbs Also See for G9 PowerSet:
Table of Contents

Advertisement

NOTE: Voice Command performance may vary based on
environmental conditions including driving speed, helmet type
and ambient noise.
For improved performance of the Voice Command feature,
minimize the wind impact on the microphone by using the large
microphone sponge and closing the visor.

6.2 MAKING 3-WAY INTERCOM CALLS

To start an Intercom Conference Call with Channel "A" and "B":
OPTION 1: Voice Connect (VOX)
1. Speak any word loudly into the microphone to open the
Intercom channel.
2. When you hear the Voice Command tone, say
make an intercom call with Rider A and Rider B.
OPTION 2: Manual Mode
1. Add Channel "A": Tap "A"
2. Add Channel "B": Tap "B"
If you are already in an Intercom Call with Rider A or B, you can add
another rider (A or B) by tapping the respective button, or another
rider can join the intercom call in the same way.
To end Intercom Call press the respective Channel "A" or "B" Button.
NOTE: 3 and 4-way intercom calls can only be made using Channel "A"
and Channel "B".

6.3 MAKING 4-WAY INTERCOM CALLS

Once you have successfully paired the four G9s as described in
5.2c. proceed as follows:
1. Make sure all four G9s are in Standby mode.
|
scala rider
G9 / G9 PowerSet
®
14
2. Passenger 2 should tap "B" to call Passenger 4. Wait until audio
is heard on both G9s.
3. Rider 1 should tap "A" to call Passenger 2.
4. Rider 3 should tap "A" to call Passenger 4.
Now the 4-way Intercom conference mode is established.
"Call Intercom" to
:

6.4 USING CLICK-TO-LINK INTERCOM

If you want to...
Start a CTL call request
(search lasts up to 10 sec.)
End a CTL call /
Cancel a CTL call request
Accept a CTL call
Reject a CTL call
Enable/Disable CTL
(Disabled by default)
If other scala rider users are nearby, your next Click-to-Link call
may randomly connect to any of them.
Perform this action:
Double tap "A"
Tap "A"
When hearing the CTL ringtone:
Tap "A" or say any word loudly to answer
by VOX
While hearing the CTL ringtone:
Remain silent until the ring tone stops
Via the Voice Menu or Cardo Community

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scalariderg9Scala rider g9Scala rider g9 powerset

Table of Contents