Table of Contents
Advertisement
5. INTERCOM CONFIGURATION
The scala rider G9 allows sled-to-sled full duplex intercom
communication at a range of up to 1 mile / 1.6 km (subject to
terrain) with antenna open and within line of sight.
Pairing with another scala rider G9
To chat with another scala rider device via Intercom, first pair the
scala rider G9 to the second device. Pairing is a one-time process.
Once paired, the two units will automatically recognize each
other whenever it is within range.
NOTE: The G9 PowerSet contains two factory-paired units
configured to communicate via their Channel A buttons.
Intercom Compatibility
Your scala rider G9 is compatible with all scala rider intercom
models for intercom calls. In addition, it is also compatible with
the Schuberth SRC-System™. Intercom range with other models is
limited to the distance of the device with the shorter range.
For instructions on how to pair with other scala rider models,
please visit www.cardosystems.com/compatibility.
Open the antenna for
maximum range
Intercom communication is possible using one of the three
Intercom modes:
Section
"One+8" Intercom
5.1
Toggling Mode
(scala rider G9 only)
Section
Intercom Conference
Mode (all scala rider
5.2
models)*
Section
Click-to-Link
5.3
(compatible scala rider
models)
2-way Intercom conversations
within a group of up to eight other
"One+8" Buddies
Intercom Conferencing (2-way,
3-way and 4-way) (Channel "A"
and "B")
1-on-1 spontaneous intercom
conversations with random
scala rider users near you who are
not already paired to your G9
scala rider
G9 / G9 PowerSet
®
|
9
Advertisement
Table of Contents
