Click-To-Link Intercom Mode; Using The Intercom; Making 2-Way Intercom Calls - Cardo Systems G9 PowerSet User Manual

Bluetooth communication and entertainment system for snowmobile helmets
Hide thumbs Also See for G9 PowerSet:
Table of Contents

Advertisement

5.3 CLICK-TO-LINK INTERCOM MODE

Click-to-Link is a spontaneous, "social" feature of your G9.
Use Click-to-Link to instantly initiate 1-on-1 intercom calls with
other scala rider users near you, without those users already
being paired to you. Think of it as a private channel that you can
set up on-the-go with other scala rider users that you see along
the way.
The Click-to-Link feature can be disabled on your G9 effectively blocking
any attempt by a third party to send a Click-to-Link request to you. See
section 6.4 for details of how to use Click-to-Link.

6. USING THE INTERCOM

6.1 MAKING 2-WAY INTERCOM CALLS

There are two ways to start an intercom call with devices that are
paired to your scala rider G9.
OPTION 1: Voice Connect (VOX) Intercom Call
Use this for either "One+8" Intercom or 2-way Intercom
Calls (Channel "A" or "B")
1. Speak any word loudly into the microphone to open the
Intercom channel.
2. When you hear the Voice Command tone, say
• the name of a "One+8" Intercom Buddy i.e. "John Smith"
• or say "Call Intercom" to start an intercom call with Rider A and
/ or Rider B (subject to who is present)
NOTE: VOX Intercom call with only Rider A or Rider B will end
automatically after 30 seconds of silence.
Use this to start an Intercom call with either:
• "RIDER A" – tap "A"
• "RIDER B" – tap "B"
• "One+8" Intercom Buddy – See table below
To end a call tap the respective button again.
"One+8" Intercom
SAY THE NAME:
a. Tap "VC"
b. Speak the
:
OPTION 2: Manual Mode
Voice Command button
"One+8" Intercom
Channel A button
Connect to Rider A
CHOOSE THE NAME (from your Buddy List):
a. Press "VC" for 2 seconds
b. The G9 plays the names of all pre-paired
name of
"One+8" Intercom buddies.
the "One+8"
OR
c. Once you hear the name of the Buddy
Intercom
you wish to call, tap the Voice Command
Buddy
button or speak any word loudly into the
microphone.
To cancel "One+8" Buddy List playback:
Press "VC" for 2 seconds.
Channel B button
Connect to Rider B
scala rider
G9 / G9 PowerSet
®
|
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scalariderg9Scala rider g9Scala rider g9 powerset

Table of Contents