Making And Receiving Mobile Phone Calls; Status Light States; Working With The Fm Radio - Cardo Systems SCALA RIDER Q2 PRO User Manual

During Standby, press and hold the Volume Up Button for
three seconds and you will hear a beep:
• One beep – Voice Connect set to Primary Buddy
• Two beeps – Voice Connect set to Secondary Buddy
MAKING AND RECEIVING MOBILE
PHONE CALLS
PHONE FUNCTIONS
Tap the CTRL Button or speak loudly any word
Answer a call
of your choice during an incoming call.
Tap the MC Button or remain silent for 15
Reject a call
seconds during an incoming call.
Tap the CTRL Button to end a call.
Terminate a call
During Standby, tap the CTRL Button and
Voice Dial
state the name of the person you wish to
call. This feature is supported only by mobile
phones that support the Voice Dial feature.
During Standby, press and hold the Volume
Redial
Down Button for three seconds.
NOTES: If your Bluetooth mobile phone is paired to a Bluetooth GPS
device, not directly to the scala rider Q2
Phone functions may not be compatible.
When the headset is on an active phone call, any Buddy Intercom call
request will be rejected automatically.
Once the phone call audio link drops, you can initiate and accept
Buddy Intercom calls.
, some of the above
pro

STATUS LIGHT STATES

None
Alternating red and Blue
flashes
Simultaneous red and Blue
flashes
Rapid Red flashes
1 blue flash every 3 seconds
2 blue flashes every 3 seconds Audio is on
1 red flash every 3 seconds
2 red flashes every 3 seconds
Solid red

WORKING WITH THE FM RADIO

Your headset is equipped with an FM Radio receiver and RDS (Radio
Data System) technology, allowing you to choose how and when you
listen to your favorite stations.
The scala rider Q2
enables you to listen to FM Radio while you
pro
are not receiving audio from another audio source.
While listening to the radio, you do not have to worry about
missing any calls, as the headset automatically mutes the FM
Radio and switches to Bluetooth headset operation when an
incoming call is received, or when you decide to initiate a call.
When the conversation is over, the headset automatically tunes
back in to the FM Radio.
The RDS Feature
Thanks to the RDS feature, your headset will automatically select the
Headset is off
Mobile phone Pairing mode
GPS Pairing mode
Intercom Pairing mode
Standby – No call is in progress
Standby – Battery is low
Low battery while audio is on
Headset is being charged
scala rider ® Q2
™ 11
pro