13.4 Auto Dial Button
A button set to this function dials a stored number. That number can be any number composed of the digits 0 to 9 plus *
and #. It can be an internal or an external number. It can be a partial number that you complete dialing after pressing
the button. It can also be a
Auto Dial and External Auto Dial.
!
Warning
·
This process will overwrite the existing function of a programmable button without any warning.
1. Press Feature *1.
· If a security code is requested, enter your phone login code and press #.
2. Press the button to program.
· You cannot override the programming of any button configured to a call appearance function by your system
administrator.
· On buttons that you can program, any existing function is overwritten without warning. If in doubt, use
Feature *0 to inspect the button first.
3. Enter the number you want stored by the button. This can be a partial number which you will complete after
pressing the button.
· The
button deletes the last digit entered.
4. When the number is complete, press
13.5 Internal Auto Dial (User Button)
A button set to this function calls another user. The button can also be used to see the current state of the other user.
The button's icon will flash when the other user has a call alerting them. When that is the case, pressing the button
answers their call. When the icon is steady the user is busy.
!
Warning
·
This process will overwrite the existing function of a programmable button without any warning.
1. Press Feature *2.
· If a security code is requested, enter your phone login code and press #.
2. Press the button to program.
· You cannot override the programming of any button configured to a call appearance function by your system
administrator.
· On buttons that you can program, any existing function is overwritten without warning. If in doubt, use
Feature *0 to inspect the button first.
3. Enter the extension number of the user for who you want a button.
· The
button deletes the last digit entered.
4. As soon as a valid number is entered, the value is saved and the button set.
M7208 Telephone User Guide
IP Office
system short code
for a telephone system feature. This button function is also known as
13
Hold.
Page 70
- Issue 02d (25 June 2014)